The Super Power Flow reloaded kit from HKS has been designed to reduce intake air resistance by removing stock intake pipes that can cause turbulence due to the corrugations normally found in them.

The pipes are made from aluminium and include 2 x 150mmx60mm diamiter HKS Super Power Flow Air filters in green.
Each filter has an easily replaceable “Dry 3 layer” foam filter mounted in to the signature HKS filter frame.

Dry 3 layer type Super Filter was newly developed. Intake efficiency, dust collection performance and replacement cycle are highly balanced. It is long life type filter.

Each kit includes everything required to carry out the full conversions from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.
The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

• 2 x Super Power Flow Reloaded Filters
• 2 x Intake Hard Pipes
• Silicon Coupelers
• Hose clamps
• Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

Take things a leap further with the Racing Suction Reloaded Intake kit.
The Racing Suction reloaded kit from HKS takes things a leap further by improving on the Super Power Flo Reloaded intake system to reduce intake air resistance even further by removing most of the stock intake pipes that can cause turbulence due to the corrugations normally found in them.

The pipes are made from aluminium and include 2 x 150mm-70mm diamiter HKS Racing Suction Reloaded Air filters in Yellow.
Each filter has an easily replaceable “wet 2 layer” foam filter mounted in to the signature HKS filter frame.

Wet 2 Layer Type Super Filter has been used and proofed long time. It reduces intake resistance and special high viscosity glue has high dust collection performance. (These can re replaced with the 3 layer dry type filter element)
Each kit includes everything required to carry out the full converisons from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

• 2 x Racing Suction Reloaded Filters
• 2 x Intake Hard Pipes
• Silicon Coupelers
• Hose clamps
• Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

Venturi Drive Super Sound Blow Off Valve – Release Type
The all new ribbed main body dissipates heat more effectively and the venturi shaped funnel creates a sharp dynamic sound.
Venturi Drive dump valves also feature “Dual Drive” for maximum response, a small port for low boost and a larger port for high boost.

The main purpose of the dump valves is to improve the response of the turbo by quickly releasing the boost pressure before the turbo stalls.

They are made from die cast polished aluminium with a brass piston and a rubber diaphragm, meaning they can easily cope with boost pressures up to 1.2 bar with the supplied spring.
There is an alternative hard spring for boost pressures above 1.2bar and also a soft spring available for very low boost applications.

Blitz VDSS Blow Off Valves  are also tension adjustable.

This kit includes everything needed to install onto your vehicle. (Please remember that most of these kits are designed to install on a standard setups so if you intend to install this on a single turbo conversion some modification may be required)
This kit is a Release Type

Please allow up to 28 days for delivery for this item if not in stock.

Venturi Drive Super Sound Blow Off Valve – Release Type
The all new ribbed main body dissipates heat more effectively and the venturi shaped funnel creates a sharp dynamic sound.

Venturi Drive dump valves also feature “Dual Drive” for maximum response, a small port for low boost and a larger port for high boost.
The main purpose of the dump valves is to improve the response of the turbo by quickly releasing the boost pressure before the turbo stalls.

They are made from die cast polished aluminium with a brass piston and a rubber diaphragm, meaning they can easily cope with boost pressures up to 1.2 bar with the supplied spring.

There is an alternative hard spring for boost pressures above 1.2bar and also a soft spring available for very low boost applications.
Blitz VDSS Blow Off Valves  are also tension adjustable.

This kit includes everything needed to install onto your vehicle. (Please remember that most of these kits are designed to install on a standard setups so if you intend to install this on a single turbo conversion some modification may be required)
This kit is a Release Type

Please allow up to 28 days for delivery for this item if not in stock.

Large FD3s Intercooler Kit with Induction Pipeing (CS Edition)

No compromise for performance and the lowest possible price for maximum cost-to-performance ratio achieved. Inner tube type core is utilized to achieve light weight construction, and offset fin for maximum cooling efficiency and low pressure loss.
Louver type fin is employed for outer fin for better airflow and maximum cooling performance.

Pipes are designed with minimum bend and made of aluminum for weight reduction and less pressure loss.
Side tanks and pipes are polished for better look.

CS stands for Chemical Shine, a process of chemical treatment which is applied to the intercooler core to produce a durable shine.

Kit Includes

• Blitz Front Mount CS Edition Intercooler
• Alloy Intercooler pipes
• Silicon Joining hoses
• Brackets and Clamps

Please note that the stock air cleaner box cannot be used. Please use Blitz SUS power air cleaner (part no 26101) and the battery will require resizing.

If not in stock please allow up to 6 weeks for delivery, If you require this part urgently please contact us prior to ordering so we may check stock availability.

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

• GReddy single TD06-20G 16cm² turbo
• SUS Manifold 50mm ex mani
• Airinx Filter,
• TIAL External Wastegate  (TIAL09 return)
• Fittings

Image is for illustration purposes only as actual kit may vary slightly from that pictured.

This kit is special order and may take up to 8 weeks for delivery.

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

• GReddy single TD06SH 25G 16cm² turbo
• SUS Manifold 50mm ex mani
• Airinx Filter,
• TIAL External Wastegate  (TIAL09 return)
• Fittings

This kit is special order and may take up to 8 weeks for delivery.

Get big power gains with the GReddy T78 Turbo Kit.
All GReddy Turbo and Turbo Upgrade kits exclusively use GReddy Spec. Mitsubishi Turbochargers. Our kits are design and tested to match the best-sized turbo per application. This means you get good response, smooth driveability, performance that can still be upgraded, and lasting reliability.

Kit Includes

• Greddy T-78 Turbo (T78-33D 17cm)
• Stainless Steel SUS Manifold
• Stainless Steel SUS Downpipe
• Racing Wastegate (50mm & Type RO8)
• All Lines and fittings

Image is for illustration only and actual kit may vary from that in the picture.

Special Order Item, this may take up to 8 weeks for delivery.

Refresh your FC’s tired suspension with Bilstein’s B6 Sport dampers.
Performance you can feel.
If you expect more damping power from your shock absorber even under loads but dont want to opt for an all out sports model.
The Bilstein B6 is the ideal solution.

The product benefits at a glance:

• Increased power reserves and service life – even when pulling transporters and trailers or during frequent journeys with loads
• Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
• Marked improvement in safety and sportiness without additional spring changes (lowering)
• Bilstein gas pressure technology
• Bilstein mono – tube/Upside – Down technology – made in Germany
• Road – tested by Bilstein and fine – tuned
• No German TuV registration required

Sold Individually
Please select front or rear from the drop down menu

Save Oner 10% when buying a complete set for your FC plus savings on combined delivery.
Image is for illustration purposes only and may not represent the actual damper design you will receive.
Please allow up to 28 days for delivery.

Expand your GReddy Profec OLED Boost Controller to do so much more.
The GReddy Profec MAP connects to the current GReddy Profec OLED Boost Controller and, through boost maps, provides even finer control over your vehicle’s boost pressure. Boost correction is not the only added function in the addition of the Profec MAP! The following features have been added:All parameter settings can be set by PC via USB cable (sold separately), Display Gear Position, Speed, RPM, Engine Temp, Throttle Position, Backlight dimming and scramble boost switching functions.

Overview
Expand your boost control with additional features using the new Greddy Profec MAP! For use with Greddy Profec (P/N 15500214) This new MAP easily plugs in between the Profect Display/Control unit and Profec main unit, with some additional connections depending on application.

Features

• Boost Map Correction – Fine boost tuning settings via 10×10 boost maps (Load vs Duty %)
• Boost Correction by RPM, Throttle Position, Speed, Gear Position, or Water Temp Example: Boost can be lowered if the car is not within the desired operating temperature. Using the Gear Position feature, boost can bet adjusted individually for each gear and engine speed.
• Addtional Profec monitoring and data loging via PC software.
• AUX input for Over Take Boost Function future using optional Remote Swithcing System
• PC Compatiable (Profec MAP software) with use of mini-USB to USB cable (sold seperately)

Notes

• Plugs-in easily inbetween Profec Display/Control unit and Profec main unit (Additional connections depending on application.)
• PC Compatiable (Profec MAP software) with use of mini-USB to USB cable (sold seperately)
  • OS: (Japanese, English) Windows Vista, Windows 7 (32bit, 64bit)
  • CPU: 1GHz or more 32bit or 64bit processor
  • Memory: 1GB or more
  • HDD free space: 20MB or more

  
  Please allow up to 28 days for delivery if not in tock,