Hypercarbon-Plus Brake Pads from Project Mu (Japan Domestic Market Version)
These are the HC+ Compound normally onlty sold in Japan and not for export.

The HC+ Pads offer slightly more stopping power than the Export version the HC800 and are made in Japan.
When you need extreme stopping power with extreme performance applications, you need Project Mu HC+ pads. The HC+ is capable of 800 Celsius yet is still able to use effectively with little warming up.

HC+ is a genuine ‘cross over’ pad suitable for both track day and race conditions while still working extremly well on the street. The HC+ is extremely capable in competition environments, so use this pad if you are involved in serious track days, rallying, autocross, sprint, time trails etc.

Along with temperature capabilities, HC+ is renowned as a ‘driver’s pad’ with unmatched driver feel and control. Available in many shapes and thicknesses.

The HC+ Pad sets are currently only available as full sets, due to their special order from Japan. Though we can special order front or rear sets if contacted directly.
Image is for illustration purposes only.

Now available from us right here in the UK.

The RE-medy water pump has been designed by our friends from Mazmart in the USA, They take a new genuine water pump and install their very own high quality billet impeller on it, This helps increase flow while decreasing cavitation at higher RPM.

This high flow RE-medy water pump is designed to prevent cavitation at engine speeds as high as 10000 rpm.

It is a direct fitment, as OEM and comes with a new Mazda OEM gasket.

RX-8 water pump for series 1 version, 2003-2008.

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Leave your cooling concerns behind with the installation of a chassis-specific KOYO Racing performance radiator for the Manual Transmission 1983-85 RX-7 12A. The KOYO Radiators (1-7/8″ or 48mm) single-pass radiator provides improved cooling coverage for both street and track applications.

Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-7.

Specifications:
16-3/4″ H x 22″ W x 1-7/8″ TH
– MT only – Auto transmission models required the installation of an external transmission oil cooler.

Koyo USA Part Number – HH063144

Special order item only, please contact us in advance prior to ordering as these can take up to 3 months as they are normally made to order.

A slightly thinner core that the 53mm Series 1 version with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper “racing” radiators)
The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish
Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade
Suitable for 2008-2011 RX-8 R3 models with Manual transmission only
Please allow 7-14 days for delivery depending on stock levels.
PICTURE IS FOR ILLUSTRATION PURPOSES ONLY

An excellent upgrade for your old, tired or failed ignition coils in your RX-7 FB or FC ECI. These MSD coils offer very high voltage output of up to 45’000 volts.
MSD ignition Coil, Blaster 2, with Ballast and Hardware

Blaster 2 Coil, w/Ballast & Hardware

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6-Series Ignitions, our blaster coils are the right choice. For MSD Ignition applications. With a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil. These blaster coils are supplied with a 0.8 ohm ballast resistor plus a terminal and boot to fit most applications. Mallory Melonite applications also require the ballast resistor.

• Performance upgrade for canister style coils
• High voltage and energy output
• Improved materials and turns ratio
• Improved performance
• A performance upgrade for points
• Comes with 0.8 ohm resistor; fits most applications
• CARB approved legal for use in all states
• Use with stock or MSD 6-Series Ignitions

A great upgrade option for your failed OEM coils on an early rotary engine.
MSD ignition Coil, Blaster 2, High Performance

Blaster 2 Coil

The blaster coils share the same special windings and high voltage output but do not include a ballast resistor.
When you are using an MSD Ignition control, the ignition is responsible for delivering the voltage to the coil so a ballast resistor is not necessary.

• Low resistance and improved turns ratio produces a powerful spark for improved performance
• Special windings and high voltage output; does not include a ballast resistor
• Sturdy metal housing is finished in red
• OBD II and CARB approved; legal for use in all states; D-40-37

Add an extra 750cc of oil to your RX-8’s differentials capacity. and aid cooling.

Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock diff holds around 1.4 litres of oil increasing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

A great upgrade for those looking to take their car on track. Revolution understand cooling of the diff is very important so have also integrated cooling fits in to their design.

Made from cast aluminium, this cover increases the diffs oil capacity by around 750cc
This Diff cover is compatible with all model years of the RX-8

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.

Add an extra 1 litre of oil to your FD’s differentials capacity.
Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock Diff holds around 1.4 litres of oil incresing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

A great upgrade for those looking to take their car on track. GReddy have taken this in to account by adding internal oil baffles in to the casting to reduce oil slosh under hard cornering.

GReddy have also included two 3/8pt (not 3/8npt) ports in the the casing design to allow for easy installation of a differential oil cooler (if your going that extreme) or an oil temperature sensor (yes they have literally thought of everything when designing this diff cover)

Made from cast aluminium, this cover increases the diffs oil capacity by around 1 Liter, and comes with a high power magnetic drain bolt to help keep all that new oil clean and free from debris.

This Diff cover is compatible with all model years of the Rx-7 FD

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.