This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

These bushes from Whiteline replace the stock ones found in the front lower control arm (often referred to as the wishbone) These bushes are not available from some other manufacturers like Powerflex.

Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whitelines superior formulation shock bushings enhance the performance of new and used shock absorbers.

Whiteline Part#: W33338

Sold as a pair.

Finding a front strut brace for the First Generation RX-7 FB these days was pretty much impossible. Then In steps Whiteline suspension with their Aluminium front strut brace, Well made a stupidly affordable.
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Part KBS608

This is a high quality replacement air filter for your RX-7 fits both RX-7 FC3s and FD3s.
A Genuine Mazda Air Filter will be supplied whenever possible, however if unavailable we may select a high quality alternative.

High Quality Replacement Clutch Slave Cylinder for the Mazda RX-7 FC3s This will fit the 2nd Generation RX-7 Turbo II Only
Many owners are choosing to replace their clutch Master and Slave Cylinder as a precautionary measure, There is nothing worse then a brake down due to a leak on either of these cylinders.

Common signs of slave cylinder failure include

• The Pedal failing to return to the top when released
• Clutch fluid leaking from the Cylinder
• Inability to select gears

This is the Master Cylinder you will require if your using a Turbo II Gearbox in your RX-7, it is worth noting that this is different to the EGI Slave cylinder.

We can now offer these genuine Headlight covers to our customers to replace their missing or broken covers on the RX-7 FD3s.
Please note these will come in primer as per genuine body panels and will require painting at a bodyshop once you receive them.

Sold individually so please select either the left or right cover from the drop down menu before hitting the add to cart button.

We have put together a Powerflex front suspension package for your RX-8 using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Trailing Arm Front (inner) Bushes x 2
• Trailing Arm Rear (Outer) Bushs x 2
• Track Control Arm Bushes x 2
• Lower Link Arm (Inner) Bushes x 2
• Upper Front Link Arm (Inner)Bushes x 2
• Upper Rear Link Arm (Inner) Bushes x 2
• 16mm Rear Antiroll Bar Bushes x 2
• Diff Carrier Bushes x 2

Normal Package Price should be £399.30 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £371.00

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the rear suspension and ARB and diff mount setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex front suspension package for your RX-8 using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Lower Wishbone (Control Arm) Bushes Front x 2
• Lower Wishbone (Control Arm) Bushes Rear x 2
• Upper Wishbone Bushes x 4
• 26.5mm Front Antiroll Bar Bushes x 2

Normal Package Price should be £260.78 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £242.50

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full front suspension and ARB setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only