Comma 15w40 Mineral Oil 4 x 5 Liter (20 Liters total) Pack offering a big saving on shipping costs.

This is the standard stuff that we normally use on our services, offering a higher viscosity than the recommended oil, 15w40 will help protect the inside of your engine better especially the stationary gear bearings (a key weak point on the RX-8 when using 5w30)

This oil is supplied in a 5 liter can and should be enough for a oil change plug 1-1.5 liters spare for top ups.

We recommend 3000-6000mile (or 6 months) oil changes to keep your oil as clean as possible.

Larger quantities are available please contact us for pricing

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 20 Liter Drum

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 4 Liter Can

HKS Super Oil series were developed on the concept of “engine oil is one of the engine part”.HKS’ original “HIPER ESTER” can follow extreme boundary lubrication to any kind of engines on the metal absorbed molecular level. Each engine oil viscosity was determined specifically for the target engine for optimum engine performance. Super Oil is 100% specially blended synthetic oil.

HKS say 13BT oil is the best to use for the rotary turbo engine.
100% synthetic oil can prevent carbon from adhering to inside the housing that usually occurs in a rotary engine. HIPER ESTER maintains the oil film retainment under high temperature and airtightness inside the housing without risk to the rotary engine apex seals.

Sold as 1 Liter Can

Totally reliable brake fluid that combines a boiling point so high it’s in another dimension with durability and maintainability. You know it’s time to change your G-four 335 brake fluid, which can reach close to 300C, when the color changes from green to crystal clear.

Project Mu’s G-Four 335 Brake Fluid had one of the highest boiling points in the industry at 335℃, giving you confidence on the brakes no matter how hard you lean on them.

Brake fluid is often overlooked as a performance upgrade when looking at brakes, When upgrading your brake system, you should always improve the quality of your fluid to match the increased demands on your braking system.
Specs:

• Type : Glycol/100% Synthetic
• Dry Boiling Point : 335℃
• Wet Boiling Point : 221℃
• Volume Per Bottle : 1000ml

DO NOT MIX WITH OTHER OILS

Normally in stock however please check prior to ordering if you need this brake fluid urgently.

Save on a 6 bottle pack plus combined Shipping. Save £27.94 on this pack, This pack works out at £15.00 per bottle
A Full Synthetic Oil SAFE for your Rotary Engine
This should be enough oil for your to carry out an oil change and have spare to top up with.
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 10W-30 can reduce or even eliminate some of the problems you may be having.

As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.

• With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals. 
• Allows for better sealing of the chamber, facilitating more power generation. 
• Extends the life of turbochargers by reducing bearing coking.
• Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
• Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
• Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
• Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output. 

A full synthetic oil specially formulated for your rotary engine from Idemitdu
Each Bottle contains 1 US Quart of Oil

This Awesome Assembly Lube is used on all our engine rebuilds here at Essex Rotary, It makes the assembly of tight fitting close tolerance parts a breeze while still offering excellent protection for parts like stationary gears on initial start up.

Here is what Royal Purple have to say.
Max-Tuff is an ultra-tough, synthetic lubricant. It’s designed for engine builds and repairs. Max-Tuff utilizes unique, synthetic molecules that adhere to metal surfaces to create a formidable, load-bearing physical barrier between surfaces. This minimize the metal-to-metal contact and wear in boundary lubrication conditions, and provides excellent protection against rust and corrosion of both ferrous and nonferrous metals.

PERFORMANCE ADVANTAGES

• Greater wear protection
• Clean, efficient equipment
• Extends equipment life
• Compatible with conventional mineral and synthetic oils
• Non-foaming
• Outstanding rust / corrosion protection
• High temperature service capability

Sold in an 8oz bottle