This product is one of Adaptonic’s plug-in ECUs. Also called RX7 S8 or FD Twin Turbo JDM.
Please note that this ECU will work with Some S7 FD’s depending on the ECU connector style, if your not sure please send us a picture so we can help identify your specific requirements.

Our main objective in creating the Adaptronic Modular ECU line is to work towards Adaptronic’s mission which is to give people control. In doing this, we came up with a system which would give people greater flexibility and at the same time, overcome the limitations of our main product line, the Select ECUs.

GENERAL FEATURES

• Modular system, so that people can buy hardware upgrades later as their needs develop (eg additional inputs, outputs, or specific functions, eg drive by wire or built-in lambda)
• Wireless communication
• Maximum output of 22 (8 ignition, 8 injector, 4 auxiliary, tacho and fuel pump)
• 3 complementary drivers in the ECU to drive inverse outputs
• Smooth transition to direct fire
• Drive dual speed fuel pump
• Injector staging is automated
• Has an option to manually set the percentage of fuel to be delivered in secondary (or third, or fourth…) stages
• Handle the factory pickup, the 36-1 FFE trigger with the factory sensor, and the 36-1 FFE trigger with a Hall effect sensor
• Great twin turbo control
• Dual speed thermofan
• Fast USB communication, requiring no drivers
• Headphone port for listening to the knock sensor while tuning
• 4 x serial in ports
• 1 x CAN port
• Power over USB to do loading of maps, firmware etc without having to provide it with 12V power
• 32MB of onboard logging to flash
• Exception logging, able to detect faults and log a bunch of things that happen around the same time to help with ECU setup and tech support
• Tested to MIL-STD-202G, a military vibration standard, which varies the frequency and peaks at 7.5g of oscillating acceleration

eM0d012 ECU plugs directly into the factory loom, with additional inputs and outputs available on unused pins in the factory connector. The additional pins you have access to give you the following options:

• • • An additional 2 injector outputs
    • An additional O2 input, and 2 additional 0-5V inputs for logging or other functions like sequential box strain gauges
    • Additional ignition output for conversion to direct fire
    • Oil pressure, fuel pressure and oil temperature inputs (plus we read the fuel temperature input and use that in the fuel density calculation)
    • CAN (Wideband lambda can be connected via analogue input, or via serial.)

 
The base eMod012 ECU can also be expanded or upgraded to use one of the following boards:

• • • DBW / e-throttle controller
    • Mini Output Board (6 x push-pull aux)
    • Mini Analogue Input Board (4 x analogue inputs)
    • Mini Real-Time Input (6 x inputs) – additional 2 x CAS, 3 x VSS, 1 x flex
    • Lambda Controller
    • EGT Inputs

Mishimoto silicone RX-7 radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibres to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda RX-7.

Features:

• Direct fit for 1993–1997 Mazda RX-7
• Max temperature of 330°F
• Made of high grade silicone and heat-resistant embedded fibres
• Efficiently reduces heat
• Increases pressure tolerance
• OEM replacement fit
• Mishimoto Lifetime Warranty

Available in:

• Black
• Blue
• Red

This product is one of Adaptonic’s plug-in ECUs. Also called RX7 S6 or FD Twin Turbo.
Our main objective in creating the Adaptronic Modular ECU line is to work towards Adaptronic’s mission which is to give people control. In doing this, we came up with a system which would give people greater flexibility and at the same time, overcome the limitations of Adaptronics main product line, the Select ECUs.
Adaptronic Part Number – eMod011/RX7 S6

GENERAL FEATURES

• Modular system, so that people can buy hardware upgrades later as their needs develop (eg additional inputs, outputs, or specific functions, eg drive by wire or built-in lambda)
• Wireless communication
• Maximum output of 22 (8 ignition, 8 injector, 4 auxiliary, tacho and fuel pump)
• 3 complementary drivers in the ECU to drive inverse outputs
• Smooth transition to direct fire
• Drive dual speed fuel pump
• Injector staging is automated
• Has an option to manually set the percentage of fuel to be delivered in secondary (or third, or fourth…) stages
• Handle the factory pickup, the 36-1 FFE trigger with the factory sensor, and the 36-1 FFE trigger with a Hall effect sensor
• Great twin turbo control
• Fast USB communication, requiring no drivers
• Headphone port for listening to the knock sensor while tuning
• 4 x serial in ports
• 1 x CAN port
• Power over USB to do loading of maps, firmware etc without having to provide it with 12V power
• 32MB of onboard logging to flash
• Exception logging, able to detect faults and log a bunch of things that happen around the same time to help with ECU setup and tech support
• Tested to MIL-STD-202G, a military vibration standard, which varies the frequency and peaks at 7.5g of oscillating acceleration

 

The RX7 S6e/M0d011 ECU plugs directly into the factory loom, with additional inputs and outputs available on unused pins in the factory connector. The additional pins you have access to give you the following options:

• • • An additional 2 injector outputs
    • An additional O2 input, and 2 additional 0-5V inputs for logging or other functions like sequential box strain gauges
    • Additional ignition output for conversion to direct fire
    • Oil pressure, fuel pressure and oil temperature inputs (plus we read the fuel temperature input and use that in the fuel density calculation)
    • CAN (Wideband lambda can be connected via analogue input, or via serial.)

Please Allow up to 28 working days for delivery as these are special ordered from Adaptronic Australia.

Comma 15w40 Mineral Oil 4 x 5 Liter (20 Liters total) Pack offering a big saving on shipping costs.

This is the standard stuff that we normally use on our services, offering a higher viscosity than the recommended oil, 15w40 will help protect the inside of your engine better especially the stationary gear bearings (a key weak point on the RX-8 when using 5w30)

This oil is supplied in a 5 liter can and should be enough for a oil change plug 1-1.5 liters spare for top ups.

We recommend 3000-6000mile (or 6 months) oil changes to keep your oil as clean as possible.

Larger quantities are available please contact us for pricing

Hypercarbon-Plus Brake Pads from Project Mu (Japan Domestic Market Version)
These are the HC+ Compound normally onlty sold in Japan and not for export.

The HC+ Pads offer slightly more stopping power than the Export version the HC800 and are made in Japan.
When you need extreme stopping power with extreme performance applications, you need Project Mu HC+ pads. The HC+ is capable of 800 Celsius yet is still able to use effectively with little warming up.

HC+ is a genuine ‘cross over’ pad suitable for both track day and race conditions while still working extremly well on the street. The HC+ is extremely capable in competition environments, so use this pad if you are involved in serious track days, rallying, autocross, sprint, time trails etc.

Along with temperature capabilities, HC+ is renowned as a ‘driver’s pad’ with unmatched driver feel and control. Available in many shapes and thicknesses.

The HC+ Pad sets are currently only available as full sets, due to their special order from Japan. Though we can special order front or rear sets if contacted directly.
Image is for illustration purposes only.

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

This is a high quality replacement air filter for your RX-7 fits both RX-7 FC3s and FD3s.
A Genuine Mazda Air Filter will be supplied whenever possible, however if unavailable we may select a high quality alternative.

We can now offer these genuine Headlight covers to our customers to replace their missing or broken covers on the RX-7 FD3s.
Please note these will come in primer as per genuine body panels and will require painting at a bodyshop once you receive them.

Sold individually so please select either the left or right cover from the drop down menu before hitting the add to cart button.