PIAA leads the market with LED Bulbs that provide extremely low power consumption and very long life. Standard bulb fittings for easy installation and up to 6 LEDs per bulb for High Intensity.

These capless wedge lamps are ideal for most of the small lamps found in the interior and exterior or your RX

On the RX8 you can find this fitting bulb in the following locations

• Sidelights
• Puddle Lights
• Interior Map Lights
• Glovebox
• Door Lights (the small ones on the bottom of the rood that light up when open)
• Numberplate Lamps
• Boot Light

On the FD3s Your will find them in the following locations

• Sidelight Markers (on some model lamps)
• Interior Lights
• Numberplate Lamps

These LED units use a 1Watt LED putting out 85Lumins of crisp white light.

Please note these are not road legal, and are intended for off road and show use only.

Sold in pairs

PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The H11 fits the front fog light units on the RX-8. putting out an equivilent of 110watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The HB4 fits the headlight units on the RX-7 FD and FC. putting out an equivilent of 115watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

Essex Rotary bring your these high quality Aluminium Replacements developed and made in the USA by Rotarty13b1
The Rotary13b1 Aluminium Mazda 3rd Gen RX-7 Door Handles are here! The stock plastic exterior handles are well known to snap off from use over the years, leaving you to open the FD from the passenger side. With our replacement FD3S Aluminum door handles, they will now last as long as you own the car!

Door handles are sold in pairs, we would like FD owners to replace both, so they match. Replacement is not hard if you have taken off the interior door panels off before. Installation should take no more than 30-40 mins per side, if you are taking your time.

Available in Black or Silver
Please select your color choice from the dropdown menu found next to the add to cart button.
Please allow up to 28 days for delivery if not in stock.

This Alternator has been specially selected by us as an ideal replacement for your original alternator if it has failed.

With a 100A output and and OEM quality fitment your all set to power up your FD once again.

This item can take up to 28 days for delivery once ordered. though typical delivery times are much quicker.

Blanking plate kit for the 13b REW engine found in the RX-7 FD3s from the famous Japanese rotary tuner Super Now
This kit is used when removing Air Control Valve (ACV) to simplify the intake manifold and engine bay in conjunction with removal of the air pump.
Made from 8mm aluminium with an anodized finish.
Not suitable for 13b REW engines still running the stock air pump system.

This Kit contains 3 blanking plates.
Please allow up to 3 weeks if these items are not in stock. if you require this part quickly please contact us before ordering.

Part description:
Car Shop Glow original RX7 FD3S original LED tail lights Ver.1(flowing Turn signal)
Styled similarly to the current Audi tail light.
After washing a second hand part, the lens shell is split and the LED board is fitted. Then the wires are pressure bonded. The lens is refitted and smoked, then finally a clear coat of paint is applied to finish the job.
We hope you are satisfied with these innovative, ‘like new’ lights for your RX7.
Product details:

• Left and right tail light
• Each light is riveted with the official Car Shop Glow Authenticity plate.
• Made with clean used parts and smoke and clear finished.
• All production is done in Japan.

Part description:
Car Shop Glow original RX7 FD3S original LED tail lights Ver.1.
Styled similarly to the current Audi tail light.
After washing a second hand part, the lens shell is split and the LED board is fitted. Then the wires are pressure bonded. The lens is refitted and smoked, then finally a clear coat of paint is applied to finish the job.
We at hope you are satisfied with these innovative, ‘like new’ lights for your RX7.
Product details:

• Left and right tail light
• Each light is riveted with the official Car Shop Glow Authenticity plate.
• Made with clean used parts and smoke and clear finished.
• All production is done in Japan.

Shipping:
These items are made to order and shipped directly from Japan via Air Mail.
Air Mail is a quick option for shipping your items. Air Mail orders usually takes from 2-6 weeks depending on stock availability.
Please contact us for Air Mail quotes.
Warranty:
This product is guaranteed for 6 months against problems such as clouded lenses from water, condensation, electrical shortages, burnt out lights, and fogginess.
After a damage part is returned, Car Shop Glow will repair or exchange the part. (Return postage paid by the customer is required.)
We are not liable for any damage to the parts except for when the installation or repair is being completed on company premises.
Compatible Models:
RX7 FD3S type 1 – 6
There are circumstances when the ABS brake light will come on. If that becomes the case we offer a canceler for £30.
(Caution) When installing the blinker canceller make sure to assemble it AWAY from your cars interior and resin as the canceller generates heat.
Mounting:
Genuine OEM couplers are used in mounting.
Other:
The rear cover garnish seen in the pictures and videos is also available as a separate item.

Part description:
Car Shop Glow original RX7 FD3S original LED tail lights.
Styled similarly to the current Audi tail light.
After washing a second hand part, the lens shell is split and the LED board is fitted. Then the wires are pressure bonded. The lens is refitted and smoked, then finally a clear coat of paint is applied to finish the job.
We hope that you are satisfied with these innovative, ‘like new’ lights for your RX7.
Product details:

• Left and right tail light
• Each light is riveted with the official Car Shop Glow Authenticity plate.
• Made with clean used parts and smoke and clear finished.
• All production is done in Japan.

Shipping:
These items are made to order and shipped directly from Japan via Air Mail.
Air Mail is a quick option for shipping your items. Air Mail orders usually takes from 2-6 weeks depending on stock availability.

Carbon Kevlar Bucket Seat from SEIBON

Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fibre.

SEIBON parts are special order only so please contact us for estimated delivery times if your in a hurry for your part. Due to the nature of these products being hand made we are unable to offer a guarenteed estimated lead time for delivery once your order is placed.