Toe arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. It helps to raise straight line stability and road control. Toe arm made with high-strength steel alloys to offer high durability, strength and yet remain light-weight.

• Equipped with premium quality bushings
• Made from high quality alloy steel
• Improves rear suspension geometry, predictable response
• One-piece, OE design
• Pillow Ball Equipped

Please allow up to 3 weeks for delivery of your order.

HARDRACE Trailing arm made of unique high density steel, provide excellent stability during high speed driving or hard cornering.

• Made with high quality ultra strong steel
• ED process and painting for the highest durability
• Equipped with premium quality bushings
• Superior strength and durability
• OE direct replacement
• Pillow Ball Equipped

Please Allow up to 3 weeks for delivery of these parts.

HARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate response steering, especially during high speed driving and cornering.

• One-piece, OE design
• Provides stability
• Assists to reduce chassis twist and flex.
• Increases steering response
• Camber Function
• Pillow Ball Equipped

Please allow up to 3 weeks for delivery of these parts.

Tie rod ends are designed with high quality alloy steel. These tie rod ends are designed to have maximum accuracy, which enables them to sustain extensive load.

Features.

• Correct tie rod geometry on lowered cars by keeping them horizontally straight
• Reducing under steer and bump steer
• Increasing in steering stability
• More controllable car during hard driving
• Reversed design for optimum steering angle on lowered vehicles
• Direct bolt-on with OEM components

Please Allow Up to 3 weeks for Delivery.

Advance Power Induction kits use a stainless steel mesh filter with an aluminum variable cooling shield. They have the same flow efficiency as the SUS Power filters and the heat resistance performance of the Sonic Power.

• The stainless steel mesh filter enables maximum flow with an aggressive induction sound.
• Large diameter cooling shield keeps air temperatures low by reflecting heat radiation.
• Racing look is achieved with a buffed alloy shield and anodized blue top ring and locking plates.
• Large diameter funnel enables high flow efficiency.

This is a complete induction kit and includes everything needed to install onto your vehicle.

Blitz Part Number 42099

Please allow up to 4 weeks for delivery of your order, If you require this part quickly please contact us prior to placing your order to confirm availability.

This famout induction kit from Blits Japan uses their C4 Cores (Air Filters) these versions of the Filter are shorter and thus more compace making them ideally suited for modified engine bays where space may be an issue when compared to the their C3 Core Version.

For RX-7, FD3S, 13B-REW running Twin Turbo Setup.
Utilisez Blits Special C4 Air Filter) cores, which is 90mm in height
This kit includes everything needed to install onto your vehicle.

Blitz Part Number 26095

The BLITZ SUS Power air cleaners are made from top quality T-304 stainless steel. Totally unique, the entire filtration element is made from a fine stainless steel T-304 mesh (200 micron mesh and 150 micron crown). This mesh means the filter will never wear out, and have substantially less restriction than any other filter. Another feature is the super fine pattern of the mesh. This straightens the airflow and dramatically reduces aerodynamic tumble (restrictive turbulence). The BLITZ air cleaners also have fine mesh at the top of the filter, further improving the airflow capabilities. Unlike anything available in the market today, the BLITZ SUS Power air cleaner is by far the best performing and best looking automotive air filter money can buy, which include all the necessary pipe, brackets, and adapters.

Please allow up to 4 weeks for delivery, if you require your order quickly please contact us prior to ordering so that we may confirm availability.

Nur Spec S exhaust system.

Blitz Nur Spec S Exhaust System is a stainless steel exhaust. Blitz exhausts utilize a slanted mounting design which elminateds unnecessary bends. The specifically designed muffler and large diameter mandrel bending piping has no reduction of inner diameter in bend areas. The constant piping diameter size allows for superior exhaust flow. The most impressive feature of the blitz exhaust system is the quiet tone (with the silencer on). And its aggressive tone with the silencer removed. The blitz exhaust system comes with all necessary hardware and gaskets for a hassle-free installation.

•  Rear section only, polished SUS304 stainless steel
• 80mm bore pipework
• 114.3mm Tailpipe

Blitz Part Number MZ2020
Please allow up to 4 weeks for delivery, If  you require this part quickly please contact us prior to placing your order so that we may confirm stock levels.

The Awesome Blitz Nur-Spec R Catback is now available from Essex Rotary for the Rx-7 FD3s
Nur Spec R exhaust system.

Blitz Nur Spec-R Cat-Back Exhaust System for Mazda RX 7 1993-1995. Blitz NUR Spec-R exhaust resonates a nice deep tone without that crackling noise that you may find on other inferior exhausts. The 1-piece straight pipe design allows easy flow and less backpressure, and therefore may result in a fairly loud tone if used without the silencer. Completely out of Stainless Steel and mandrel-bent, every part of this exhaust shows quality and performance as expect from the renowned Blitz. Also included are stock factory mounting brackets, hardware, and gaskets to make your installation a snap.

• 1 Piece sytsem, polished SUS304 stainless steel
• 80mm bore pipework
• 114.3mm Tailpipe
• 98DB with baffle inserted
• Removable baffle included

Blitz Part Number MZ3010
Please allow up to 4 weeks for delivery if not in stock within the UK, if you require your order quickly please contact us prior to ordering to confirm stock levels.

Save on a 6 bottle pack plus combined Shipping. Save £27.94 on this pack, This pack works out at £15.00 per bottle
A Full Synthetic Oil SAFE for your Rotary Engine
This should be enough oil for your to carry out an oil change and have spare to top up with.
Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 10W-30 can reduce or even eliminate some of the problems you may be having.

As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.

• With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals. 
• Allows for better sealing of the chamber, facilitating more power generation. 
• Extends the life of turbochargers by reducing bearing coking.
• Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
• Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
• Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
• Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output. 

A full synthetic oil specially formulated for your rotary engine from Idemitdu
Each Bottle contains 1 US Quart of Oil

Blanking plate kit for the 13b REW engine found in the RX-7 FD3s from the famous Japanese rotary tuner Super Now
This kit is used when removing Air Control Valve (ACV) to simplify the intake manifold and engine bay in conjunction with removal of the air pump.
Made from 8mm aluminium with an anodized finish.
Not suitable for 13b REW engines still running the stock air pump system.

This Kit contains 3 blanking plates.
Please allow up to 3 weeks if these items are not in stock. if you require this part quickly please contact us before ordering.