We have put together a Powerflex rear suspension package for your RX-7 Fd3s using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Trailing Arm Front Bushes x 2
• Track Control Arm Bushes x 2
• Upper Wishbone Bushes x 4
• Upper Wishbone Outer Bushes x 2
• Toe Control Arm Adjuster Outer Bushes x 2
• Toe Control Arm Adjuster Inner Bushes x 2
• Rear Anti-Roll Bar Bushes (16mm or 18mm please select from dropdown menu) x 2
• Diff Mount Bushes x 2

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full rear suspension, ARB and Diff mount setup.

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex front suspension package for your RX-7 Fd3s using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Lower Wishbone (Control Arm) Bushes Front x 2
• Lower Wishbone (Control Arm) Bushes Rear x 2
• Upper Wishbone Bushes x 4
• 29mm Front Antiroll Bar Bushes x 2
• Power Steering Rack Mount Bush Kit x 1

Normal Package Price should be £252.33 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £234.50

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full front suspension ARB and Steering Rack setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex rear suspension package for your RX-7 Fd3s using the Powerflex Purple Series bushes for road use.
This kit consists of the following bushes.

• Trailing Arm Front Bushes x 2
• Track Control Arm Bushes x 2
• Upper Wishbone Bushes x 4
• Upper Wishbone Outer Bushes x 2
• Toe Control Arm Adjuster Outer Bushes x 2
• Toe Control Arm Adjuster Inner Bushes x 2
• Rear Anti-Roll Bar Bushes (16mm or 18mm please select from dropdown menu) x 2
• Diff Mount Bushes x 2

Normal Package Price should be £403.60 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £375.00

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full rear suspension, ARB and Diff mount setup.

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex front suspension package for your RX-7 Fd3s using the Powerflex Purple Series bushes for road use.
This kit consists of the following bushes.

• Lower Wishbone (Control Arm) Bushes Front x 2
• Lower Wishbone (Control Arm) Bushes Rear x 2
• Upper Wishbone Bushes x 4
• 29mm Front Antiroll Bar Bushes x 2
• Power Steering Rack Mount Bush Kit x 2

Normal Package Price should be £229.32 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £213.00

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full front suspension ARB and Steering Rack setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

Add an extra 1 litre of oil to your FD’s differentials capacity.
Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock Diff holds around 1.4 litres of oil incresing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

A great upgrade for those looking to take their car on track. GReddy have taken this in to account by adding internal oil baffles in to the casting to reduce oil slosh under hard cornering.

GReddy have also included two 3/8pt (not 3/8npt) ports in the the casing design to allow for easy installation of a differential oil cooler (if your going that extreme) or an oil temperature sensor (yes they have literally thought of everything when designing this diff cover)

Made from cast aluminium, this cover increases the diffs oil capacity by around 1 Liter, and comes with a high power magnetic drain bolt to help keep all that new oil clean and free from debris.

This Diff cover is compatible with all model years of the Rx-7 FD

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.

There are two versions depending on your year of manufacture.

PLEASE SELECT YOUR CORRECT VERSION FRON THE DROPDOWN MENU BEFORE ADDING YOUR ITEM TO YOUR CART. FURTHER DETAILS ABOUT COMPATIBILITY CAN BE FOUND BELOW.
br />
This simply harness from TRUST GReddy make the installation of a V-Mount Radiator mush simpler when it comes to powering your cooling fans.
This this harness you no longer need to cut and extend the factory harness to get power to your fans. It makes your installation plug and play.

Designed to be used with the GReddy V-Mount kit, this should also be compatible with other V-mount Setups.

Both Versions have the same cable length of around 95cm

Version Info

• Zenki (Early Model) Harness : fits Series 1-4 RX-7 FD with a Vin number range between 100000 – 400000 produced between Dec 1991 and Dec 1998
• Kouki (Late Model)Harness : fits Series 5 & 6 RX-7 FD with Vin number range between 500000 – 600000 produced between Jan 1999 and Aug 2002

Essex Rotary can now offer the popular K-Sport range of AirRide suspension for your RX-7 or RX-8.

Air suspension Deluxe system improves on the Basic kit by adding several upgrades. One Air Zenith compressors are included which fill the tank twice as fast as the Basic kit. We include two electronic switches (front/rear and up/down) which offer more precise control over manual paddle valves and thanks to our seamless installation system, all the electronics are housed in a stylish red and black control box. A 200 PSI dual needle gauge is included as well. All you need to do is run 2 air lines to the control box, one from the box to the tank and complete your wiring via the quick disconnect plug on the right side of the box and you’re up and running. A wireless remote control is also included so you can operate the system from outside the vehicle if you wish.

Professional installation is recommended.

All Ksport Airtech air suspension systems feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension.

These air suspension kits are designed for easy bolt-on installation.

No modifications to OEM shock absorbers, or OEM top mounts is required.

Vehicle may need to be modified for air line routing.

All Ksport Airtech Systems use Air Zenith compressors, and can be raised from the lowest setting to max height in as little as 2 seconds.

All Hoses, wiring, and installation manuals are included.

Features Include:

• 5 Gallon Air Tank with Carpeted Mounting Board
• Manual paddle valves & 200 PSI dual needle gauge
• Air Zenith air compressor
• Wide Range Height Adjustability
• High Pressure Air Bags
• High Performance Ksport Shock Absorbers
• Adjustable Lower Mount
• 36 Way Adjustable Damping

5 gallon air tank w/carpeted mounting board
A standard black steel air tank is included with the Basic and Deluxe kits.

Manual paddle valves & 200 PSI dual needle gauge
Manual paddle valves offer control of front and rear air bags. 200 psi dual needle gauge included along with mounting bracket for a clean install.

Ksport seamless installation
Our control unit offers as simple an installation as possible. Simply run your air lines to the box and connect 4 wires to our quick disconnect plug, wire up the compressors and relay and you’re done.

Remote control
Adjust your ride height from outside your car with the included basic wireless remote control.

Air Zenith air compressor
Basic kits come with a single Air Zenith compressor. We chose to use Air Zenith compressors for their reliability and performance.

Wide Range Height Adjustability
Range of lowering is 0 to 120/200mm depending on vehicle.

High Pressure Air Bags
Engineered and designed to match your vehicle. Sleeve type and double bellow type bags are available depending on what type of OEM suspension your vehicle has. Air pressure directly corresponds with how stiff or soft your car rides. Higher PSI = stiffer ride. Lower PSI = softer ride. Each car is different and it may take some time to dial in your preferred settings

High Performance KSport Shock Absorbers
Every air kit comes with the same quality shocks that are standard in our control Pro coilover systems. Air kit shocks have a different internal valving setting to accommodate changes in PSI.

Adjustable Lower Mount
Adding further fine tuning of your ride height at any PSI setting you chose is the ability to have an adjustable lower mount just like our coilover kits. The benefit to this is being able to get the perfect ride height at basically any PSI you are comfortable driving at

6 Way Adjustable Damping
All Ksport AirTech systems offer 36 levels of damping which allow you the ability to dial in your air suspension even further. Set damping softer (counterclockwise) or stiffer (clockwise) by simply inserting the included damping knob and turning it either way.

This Item is special order only and is subject to our special order T&C’s please read these before finalising your payment a link to our T&C’s can be found on the checkout page below the shopping cart.

Essex Rotary can now offer the popular K-Sport range of AirRide suspension for your RX-7 or RX-8.

Air Suspension K-sport Basic system is for people who want a complete bare bones direct bolt in air suspension system. This system features a manual paddle valve system with basic front and rear up/down operation from the switch panel that is included. A 200 PSI dual needle gauge is mounted right next to the switches so you can easily see where your air pressure is at all times. One Air Zenith compressor is standard along with our 5 gallon black steel air tank.

Professional installation is recommended.

All Ksport Airtech air suspension systems feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension.

These air suspension kits are designed for easy bolt-on installation.

No modifications to OEM shock absorbers, or OEM top mounts is required.

Vehicle may need to be modified for air line routing.

All Ksport Airtech Systems use Air Zenith compressors, and can be raised from the lowest setting to max height in as little as 2 seconds.

All Hoses, wiring, and installation manuals are included.

Features Include:

• 5 Gallon Air Tank with Carpeted Mounting Board
• Manual paddle valves & 200 PSI dual needle gauge
• Air Zenith air compressor
• Wide Range Height Adjustability
• High Pressure Air Bags
• High Performance Ksport Shock Absorbers
• Adjustable Lower Mount
• 36 Way Adjustable Damping

5 gallon air tank w/carpeted mounting board
A standard black steel air tank is included with the Basic and Deluxe kits.

Manual paddle valves & 200 PSI dual needle gauge
Manual paddle valves offer control of front and rear air bags. 200 psi dual needle gauge included along with mounting bracket for a clean install.

Air Zenith air compressor
Basic kits come with a single Air Zenith compressor. We chose to use Air Zenith compressors for their reliability and performance.

Wide Range Height Adjustability
Range of lowering is 0 to 120/200mm depending on vehicle.

High Pressure Air Bags
Engineered and designed to match your vehicle. Sleeve type and double bellow type bags are available depending on what type of OEM suspension your vehicle has. Air pressure directly corresponds with how stiff or soft your car rides. Higher PSI = stiffer ride. Lower PSI = softer ride. Each car is different and it may take some time to dial in your preferred settings

High Performance KSport Shock Absorbers
Every air kit comes with the same quality shocks that are standard in our control Pro coilover systems. Air kit shocks have a different internal valving setting to accommodate changes in PSI.

Adjustable Lower Mount
Adding further fine tuning of your ride height at any PSI setting you chose is the ability to have an adjustable lower mount just like our coilover kits. The benefit to this is being able to get the perfect ride height at basically any PSI you are comfortable driving at

6 Way Adjustable Damping
All Ksport AirTech systems offer 36 levels of damping which allow you the ability to dial in your air suspension even further. Set damping softer (counterclockwise) or stiffer (clockwise) by simply inserting the included damping knob and turning it either way.

This Item is special order only and is subject to our special order T&C’s please read these before finalising your payment a link to our T&C’s can be found on the checkout page below the shopping cart.

AEM’s Water/Methanol Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water/methanol system and the engine from particulates in the water/methanol mixture when installed in-line before the water/methanol pump, and can be used on virtually any water/methanol injection system using ¼” OD tubing.

Why An Inline Filter Is A Good Idea.

If you are using a Water/Methanol Injection System it may greatly increase pump life to use a water/methanol filter. The AEM Water/Methanol Injection Filter prevents foreign particles as small as 40 microns from clogging or damaging pumps, injection nozzles check valves or flow sensors. The AEM Water/Methanol Injection Filter uses fittings for use with 1/4″ OD nylon tubing, so it fits most Water/Methanol injection kits on the market today!

• Simple to install, takes less than a minute!
• Fits virtually every Water/Methanol system on the market.
• Polypropylene housing – rugged material that is compatible with high concentrations of methanol.
• Completely Serviceable Assembly – can be disassembled, cleaned and reused for a long service life.
• Stainless Steel mesh strainer – AEMs custom mesh strainer filters down to 40 microns – MUCH smaller than similar filters.
• Large Filtering Area assure long service life and does not significantly reduce flow.
• Micronic Mesh Screen out-performs sintered filters in both filtering and serviceability.

AEM PART NUMBER – 30-3003

Offering a discount when bought as a 4 pack, These coils are becoming increasingly popular in the RX7 FD Market.

AEM’s High-Output IGBT “Smart” Inductive Coils each deliver up to 103mJ of spark energy and a minimum of 40,000 Volts—as much as most CDI systems but without the need for a CDI module! These coils provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after its CDI burst to mimic longer spark duration. The full energy delivery and long duration of AEM’s High-Output IGBT “Smart” Inductive Coils eliminate the need to compromise energy or duration with your ignition system, and will increase performance in high-boost or high compression engines.

AEM’s High-Output IGBT “Smart” Inductive Coils deliver CDI-like spark energy with the long duration of an inductive coil. They install easily in place of your exiting coils and do not require a CDI module. AEM’s High-Output IGBT “Smart” Inductive Coils have a shock and weatherproof design that allows them to be mounted virtually anywhere. And at a cost less than what you would pay for aftermarket LS1 coils—they deliver World-Class performance at a bargain. AEM’s High-Output Coils are used on 2,000-horsepower nitrous motors without a CDI, and they perform flawlessly.

TECHNICAL SPECIFICATIONS

PLEASE NOTE THESE COILS ARE NOY PLUG AND PLAY, THEY WILL REQUIRE INSTALLATION AND THE FABRICATION OF CUSTOM WIRING. IF YOUR NOT CONFIDENT TN THIS AREA WE RECOMMEND HAVING A PROFESSIONAL UNDERTAKE THE INSTALLATION.

PLEASE NOTE THIS IS A SPECIAL ORDER ITEM.

AEM PART NUMBER – 30-2853