PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The H11 fits the front fog light units on the RX-8. putting out an equivilent of 110watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

PIAA’s Extreme White Plus are possibly the brightest bulbs on the market, The HB4 fits the headlight units on the RX-7 FD and FC. putting out an equivilent of 115watts of light

These bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.

Xtreme White Plus bulbs achieve something few other high-performance bulbs can – and that’s deliver a stunning performance whilst complying with European regulations. Surprisingly only drawing 65/55 watts power, the bulbs convert the output of light to an equivalent of 110/100 watts, appearing far brighter than standard Halogen or Xenon units by emitting a crisp, blue-white, far-reaching beam.

Sold as a pair

The excellent CUSCO front and rear anti roll bar kit for your Mazda RX-7 FD, this kit is available at a massive saving over buying them individually

Front ARB is 32mm tubular construction and rear ARB is 18mm solid construction

The Cusco Anti Roll Bars replace the factory ARB, and uses the factory mounting locations.  The Cusco ARB will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one.  The larger diameter and steel strength bar give the Cusco bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer.

This kit includes replacement rubber bushings and new clamps if needed

Please allow up to 28 days for delivery when out of stock.

This is Pineapple Racing’s exclusive Heavy Duty Water Seal kit. Pineapple Racing tested these seals for over 7 years in numerous street and track cars before offering them to our customers. They have proven to be a significant upgrade over the stock water seals. Pineapple Racing use them in all their 5-year warranty motors.
Also, these seals are re-usable if you need to reopen the motor to freshen it, as long as the mileage is not too high or the engine too overheated. In other words, if you make a mistake and blow up your engine or perhaps improperly clearance the seals or whatever, these seals can be removed, allowed to “rest” for about 30 minutes and be reused when you put the engine back together. Stock water seals must be disposed of when freshening an engine, even with just a couple heat cycles.

Kit includes

• Water jacket o-rings
• Front cover o-ring (and backup washer, if needed application dependent)
• Dowel o-rings
• Rear stationary gear o-ring
• Oil pedestal o-rings or Gasket (depending on application).
• Oil Metering Pump “O” Ring
• Dowty Washer Set (Tension Bolt Washers)

Please allow around 28 days for delivery if not in stock.

Pineapple Racing Solid Dowel Pins

• Helps prevent cracking the plates from hp loads or “ping” (esp. important in the 20B and Series 5 & earlier turbo engines)
• Spreads the load across the length of the engine.
• Helps to insure a true engine centerline which reduces engine failure and increasing bearing life
• Using an external oil line provides a more even oil pressure to the main bearings
• Low cost, easy installation
• Available for: 12A, 13B and 20B (12a and 20b Special Order)
• Custom lengths available (Special Order)

Pineapple Racing Solid Dowel Pins provide an easy, cost effective aid to hp and “ping” loads causing plate cracking or engine damage from loss of clearance from engine flex. Our super strong proprietary material has been meticulously machined to provide what we feel are the most accurate and consistently machined solid dowel pins on the market. The O.D. is accurate to 50 millionth’s! That’s 0.00005”. We “lightly” tapped one end for use with a Dowel Pin Puller.

Replace just the lower dowel pins helps to insure your engine’s centerline remains true. It is a great update requiring no machining.

Replace both lower and upper dowel pins for the maximum improvement. Replacing the upper dowel pins requires the installation of an external oil feed line to the front main oil galley to replace the OEM galley in the OEM dowel pins. Our Oil Pedestal Adapter kit makes this a simple job that can be done with simple hand tools and an electric drill.

High horsepower and the shock loads from “ping” put a tremendous load against the rotor housings. The load deflects the rotor housings outwards, pushing the dowel pin with them. The dowel pins are retained by their fit into the cast iron plates. If the loads are too high, the upper dowel pin can cause the plate(s) to crack. Additionally, since the upper dowel pins are also used as an oil galley, a massive oil leak is also possible. The OEM 20B is especially prone to this type of damage,  and with the price of the “thick” center plate near $1800us, preventing this type of damage pays for itself.

The Pineapple Racing Oil Pedestal Adapter is a stylish, Nickel plated rotor shaped adapter. It easily installs between the existing oil filter pedestal and the rear plate. It features a ¼”NPT port for an external oil line and an 1/8” NPT port for oil pressure or oil temperature.

Please allow up to 28 days for delivery if not in stock.

The Super Power Flow reloaded kit from HKS has been designed to reduce intake air resistance by removing stock intake pipes that can cause turbulence due to the corrugations normally found in them.

The pipes are made from aluminium and include 2 x 150mmx60mm diamiter HKS Super Power Flow Air filters in green.
Each filter has an easily replaceable “Dry 3 layer” foam filter mounted in to the signature HKS filter frame.

Dry 3 layer type Super Filter was newly developed. Intake efficiency, dust collection performance and replacement cycle are highly balanced. It is long life type filter.

Each kit includes everything required to carry out the full conversions from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.
The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

• 2 x Super Power Flow Reloaded Filters
• 2 x Intake Hard Pipes
• Silicon Coupelers
• Hose clamps
• Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

Take things a leap further with the Racing Suction Reloaded Intake kit.
The Racing Suction reloaded kit from HKS takes things a leap further by improving on the Super Power Flo Reloaded intake system to reduce intake air resistance even further by removing most of the stock intake pipes that can cause turbulence due to the corrugations normally found in them.

The pipes are made from aluminium and include 2 x 150mm-70mm diamiter HKS Racing Suction Reloaded Air filters in Yellow.
Each filter has an easily replaceable “wet 2 layer” foam filter mounted in to the signature HKS filter frame.

Wet 2 Layer Type Super Filter has been used and proofed long time. It reduces intake resistance and special high viscosity glue has high dust collection performance. (These can re replaced with the 3 layer dry type filter element)
Each kit includes everything required to carry out the full converisons from the stock intake airbox system to the HKS Racing Suction Reloaded setup for your RX-7 FD.

The improvement brought from this conversion should have a noticeable effect to the engine response, and power output.

The Kit includes

• 2 x Racing Suction Reloaded Filters
• 2 x Intake Hard Pipes
• Silicon Coupelers
• Hose clamps
• Fasteners, Gaskets and brackets.

Please note that delivery may take up to 28 days if not in stock.

Venturi Drive Super Sound Blow Off Valve – Release Type
The all new ribbed main body dissipates heat more effectively and the venturi shaped funnel creates a sharp dynamic sound.

Venturi Drive dump valves also feature “Dual Drive” for maximum response, a small port for low boost and a larger port for high boost.
The main purpose of the dump valves is to improve the response of the turbo by quickly releasing the boost pressure before the turbo stalls.

They are made from die cast polished aluminium with a brass piston and a rubber diaphragm, meaning they can easily cope with boost pressures up to 1.2 bar with the supplied spring.

There is an alternative hard spring for boost pressures above 1.2bar and also a soft spring available for very low boost applications.
Blitz VDSS Blow Off Valves  are also tension adjustable.

This kit includes everything needed to install onto your vehicle. (Please remember that most of these kits are designed to install on a standard setups so if you intend to install this on a single turbo conversion some modification may be required)
This kit is a Release Type

Please allow up to 28 days for delivery for this item if not in stock.

Large FD3s Intercooler Kit with Induction Pipeing (CS Edition)

No compromise for performance and the lowest possible price for maximum cost-to-performance ratio achieved. Inner tube type core is utilized to achieve light weight construction, and offset fin for maximum cooling efficiency and low pressure loss.
Louver type fin is employed for outer fin for better airflow and maximum cooling performance.

Pipes are designed with minimum bend and made of aluminum for weight reduction and less pressure loss.
Side tanks and pipes are polished for better look.

CS stands for Chemical Shine, a process of chemical treatment which is applied to the intercooler core to produce a durable shine.

Kit Includes

• Blitz Front Mount CS Edition Intercooler
• Alloy Intercooler pipes
• Silicon Joining hoses
• Brackets and Clamps

Please note that the stock air cleaner box cannot be used. Please use Blitz SUS power air cleaner (part no 26101) and the battery will require resizing.

If not in stock please allow up to 6 weeks for delivery, If you require this part urgently please contact us prior to ordering so we may check stock availability.

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

• GReddy single TD06-20G 16cm² turbo
• SUS Manifold 50mm ex mani
• Airinx Filter,
• TIAL External Wastegate  (TIAL09 return)
• Fittings

Image is for illustration purposes only as actual kit may vary slightly from that pictured.

This kit is special order and may take up to 8 weeks for delivery.