Mishimoto silicone RX-7 radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibres to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda RX-7.

Features:

• Direct fit for 1993–1997 Mazda RX-7
• Max temperature of 330°F
• Made of high grade silicone and heat-resistant embedded fibres
• Efficiently reduces heat
• Increases pressure tolerance
• OEM replacement fit
• Mishimoto Lifetime Warranty

Available in:

• Black
• Blue
• Red

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

There are two versions depending on your year of manufacture.

PLEASE SELECT YOUR CORRECT VERSION FRON THE DROPDOWN MENU BEFORE ADDING YOUR ITEM TO YOUR CART. FURTHER DETAILS ABOUT COMPATIBILITY CAN BE FOUND BELOW.
br />
This simply harness from TRUST GReddy make the installation of a V-Mount Radiator mush simpler when it comes to powering your cooling fans.
This this harness you no longer need to cut and extend the factory harness to get power to your fans. It makes your installation plug and play.

Designed to be used with the GReddy V-Mount kit, this should also be compatible with other V-mount Setups.

Both Versions have the same cable length of around 95cm

Version Info

• Zenki (Early Model) Harness : fits Series 1-4 RX-7 FD with a Vin number range between 100000 – 400000 produced between Dec 1991 and Dec 1998
• Kouki (Late Model)Harness : fits Series 5 & 6 RX-7 FD with Vin number range between 500000 – 600000 produced between Jan 1999 and Aug 2002

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1850 cfm of airflow
• Universal fitment
• Compact design with a diameter of 406 mm and an overall thickness of only 73 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 16.75″
• Fan Diamiter – 385mm
• Blade Diameter – 15.375″
• CFM Rating – 1850cfm
• Fan Speed – 1800rpm
• Current – 34.0A (inrush)
• Current – 7.18A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1300 cfm of airflow
• Universal fitment
• Compact design with a diameter of 328 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 14.75″
• Fan Diamiter – 328mm
• Blade Diamiter – 12.875″
• CFM Rating – 1300cfm
• Fan Speed – 2200rpm
• Current – 15.1A (inrush)
• Current – 7.8A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1150 cfm of airflow
• Universal fitment
• Compact design with a diameter of 305 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 12.5″
• Fan Diamiter – 285mm
• Blade Diamiter – 11″
• CFM Rating – 1150cfm
• Fan Speed – 2000rpm
• Current – 12.7A (inrush)
• Current – 7.6A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 950 cfm of airflow
• Universal fitment
• Compact design with a diameter of 255 mm and an overall thickness of only 60 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 11.5″
• Blade Diamiter – 255mm
• CFM Rating – 950cfm
• Fan Speed – 2300rpm
• Current – 13.08A (inrush)
• Current – 6.8A (normal)
• Voltage – 12volts

Ideal option for installation of Oil coolers for additional cooling if needed.

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 600 cfm of airflow
• Universal fitment
• Compact design with a diameter of 203 mm and an overall thickness of only 80 mm provides increased engine bay space
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 8.375″
• Blade Diamiter – 7.5″
• CFM Rating – 600cfm
• Fan Speed – 3000rpm
• Current – ~8A
• Voltage – 12.25volts