We have put together a Powerflex front suspension package for your RX-8 using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Trailing Arm Front (inner) Bushes x 2
• Trailing Arm Rear (Outer) Bushs x 2
• Track Control Arm Bushes x 2
• Lower Link Arm (Inner) Bushes x 2
• Upper Front Link Arm (Inner)Bushes x 2
• Upper Rear Link Arm (Inner) Bushes x 2
• 16mm Rear Antiroll Bar Bushes x 2
• Diff Carrier Bushes x 2

Normal Package Price should be £399.30 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £371.00

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the rear suspension and ARB and diff mount setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex front suspension package for your RX-8 using the Powerflex Black Series bushes for track use.
These Black Series bushes are stiffer than their purple series and aimed at track use as they may transfer more vibration through the car.

This kit consists of the following bushes.

• Lower Wishbone (Control Arm) Bushes Front x 2
• Lower Wishbone (Control Arm) Bushes Rear x 2
• Upper Wishbone Bushes x 4
• 26.5mm Front Antiroll Bar Bushes x 2

Normal Package Price should be £260.78 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £242.50

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full front suspension and ARB setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex rear suspension package for your RX-8 using the Powerflex Purple Series bushes for road use.
This kit consists of the following bushes.

• Trailing Arm Front (inner) Bushes x 2
• Trailing Arm Rear (Outer) Bushs x 2
• Track Control Arm Bushes x 2
• Lower Link Arm (Inner) Bushes x 2
• Upper Front Link Arm (Inner)Bushes x 2
• Upper Rear Link Arm (Inner) Bushes x 2
• 16mm Rear Antiroll Bar Bushes x 2
• Diff Carrier Bushes x 2

Normal Package Price should be £389.64 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £362.00

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the rear suspension and ARB and diff mount setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

We have put together a Powerflex front suspension package for your RX-8 using the Powerflex Purple Series bushes for road use.
This kit consists of the following bushes.

• Lower Wishbone (Control Arm) Bushes Front x 2
• Lower Wishbone (Control Arm) Bushes Rear x 2
• Upper Wishbone Bushes x 4
• 26.5mm Front Antiroll Bar Bushes x 2

Normal Package Price should be £251.38 however Essex Rotary are happy to offer 7% on the full front end package price bringing you this full package for just £233.50

POWERFLEX SUSPENSION BUSHES PROLONG TYRE LIFE, IMPROVE PERFORMANCE AND INCREASE THE SAFETY OF YOUR VEHICLE ON THE ROAD.

So don’t settle for your standard rubber bushes, go Powerflex and improve your driving experience.

This kit will overhaul the full front suspension and ARB setup

Powerflex also offer a lifetime warranty on their full range of bushes

We are happy to offer any of the Powerflex bushes individually, please do get in contact with your requirements.

Please note pictures are for illustration purposes only

A slightly thinner core that the 53mm Series 1 version with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper “racing” radiators)
The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish
Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade
Suitable for 2008-2011 RX-8 R3 models with Manual transmission only
Please allow 7-14 days for delivery depending on stock levels.
PICTURE IS FOR ILLUSTRATION PURPOSES ONLY

Add an extra 750cc of oil to your RX-8’s differentials capacity. and aid cooling.

Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock diff holds around 1.4 litres of oil increasing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

A great upgrade for those looking to take their car on track. Revolution understand cooling of the diff is very important so have also integrated cooling fits in to their design.

Made from cast aluminium, this cover increases the diffs oil capacity by around 750cc
This Diff cover is compatible with all model years of the RX-8

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.

Essex Rotary can now offer the popular K-Sport range of AirRide suspension for your RX-7 or RX-8.

Air suspension Deluxe system improves on the Basic kit by adding several upgrades. One Air Zenith compressors are included which fill the tank twice as fast as the Basic kit. We include two electronic switches (front/rear and up/down) which offer more precise control over manual paddle valves and thanks to our seamless installation system, all the electronics are housed in a stylish red and black control box. A 200 PSI dual needle gauge is included as well. All you need to do is run 2 air lines to the control box, one from the box to the tank and complete your wiring via the quick disconnect plug on the right side of the box and you’re up and running. A wireless remote control is also included so you can operate the system from outside the vehicle if you wish.

Professional installation is recommended.

All Ksport Airtech air suspension systems feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension.

These air suspension kits are designed for easy bolt-on installation.

No modifications to OEM shock absorbers, or OEM top mounts is required.

Vehicle may need to be modified for air line routing.

All Ksport Airtech Systems use Air Zenith compressors, and can be raised from the lowest setting to max height in as little as 2 seconds.

All Hoses, wiring, and installation manuals are included.

Features Include:

• 5 Gallon Air Tank with Carpeted Mounting Board
• Manual paddle valves & 200 PSI dual needle gauge
• Air Zenith air compressor
• Wide Range Height Adjustability
• High Pressure Air Bags
• High Performance Ksport Shock Absorbers
• Adjustable Lower Mount
• 36 Way Adjustable Damping

5 gallon air tank w/carpeted mounting board
A standard black steel air tank is included with the Basic and Deluxe kits.

Manual paddle valves & 200 PSI dual needle gauge
Manual paddle valves offer control of front and rear air bags. 200 psi dual needle gauge included along with mounting bracket for a clean install.

Ksport seamless installation
Our control unit offers as simple an installation as possible. Simply run your air lines to the box and connect 4 wires to our quick disconnect plug, wire up the compressors and relay and you’re done.

Remote control
Adjust your ride height from outside your car with the included basic wireless remote control.

Air Zenith air compressor
Basic kits come with a single Air Zenith compressor. We chose to use Air Zenith compressors for their reliability and performance.

Wide Range Height Adjustability
Range of lowering is 0 to 120/200mm depending on vehicle.

High Pressure Air Bags
Engineered and designed to match your vehicle. Sleeve type and double bellow type bags are available depending on what type of OEM suspension your vehicle has. Air pressure directly corresponds with how stiff or soft your car rides. Higher PSI = stiffer ride. Lower PSI = softer ride. Each car is different and it may take some time to dial in your preferred settings

High Performance KSport Shock Absorbers
Every air kit comes with the same quality shocks that are standard in our control Pro coilover systems. Air kit shocks have a different internal valving setting to accommodate changes in PSI.

Adjustable Lower Mount
Adding further fine tuning of your ride height at any PSI setting you chose is the ability to have an adjustable lower mount just like our coilover kits. The benefit to this is being able to get the perfect ride height at basically any PSI you are comfortable driving at

6 Way Adjustable Damping
All Ksport AirTech systems offer 36 levels of damping which allow you the ability to dial in your air suspension even further. Set damping softer (counterclockwise) or stiffer (clockwise) by simply inserting the included damping knob and turning it either way.

This Item is special order only and is subject to our special order T&C’s please read these before finalising your payment a link to our T&C’s can be found on the checkout page below the shopping cart.

Essex Rotary can now offer the popular K-Sport range of AirRide suspension for your RX-7 or RX-8.

Air Suspension K-sport Basic system is for people who want a complete bare bones direct bolt in air suspension system. This system features a manual paddle valve system with basic front and rear up/down operation from the switch panel that is included. A 200 PSI dual needle gauge is mounted right next to the switches so you can easily see where your air pressure is at all times. One Air Zenith compressor is standard along with our 5 gallon black steel air tank.

Professional installation is recommended.

All Ksport Airtech air suspension systems feature high quality air bags, proven to handle the stress and abuse of daily driving as well as drift circuit use. Take advantage of the near infinite adjustability thanks to the adjustable lower mount, 36 levels of damping adjustment, and the unmatched height adjustability (0-120/200mm depending on vehicle) of air suspension.

These air suspension kits are designed for easy bolt-on installation.

No modifications to OEM shock absorbers, or OEM top mounts is required.

Vehicle may need to be modified for air line routing.

All Ksport Airtech Systems use Air Zenith compressors, and can be raised from the lowest setting to max height in as little as 2 seconds.

All Hoses, wiring, and installation manuals are included.

Features Include:

• 5 Gallon Air Tank with Carpeted Mounting Board
• Manual paddle valves & 200 PSI dual needle gauge
• Air Zenith air compressor
• Wide Range Height Adjustability
• High Pressure Air Bags
• High Performance Ksport Shock Absorbers
• Adjustable Lower Mount
• 36 Way Adjustable Damping

5 gallon air tank w/carpeted mounting board
A standard black steel air tank is included with the Basic and Deluxe kits.

Manual paddle valves & 200 PSI dual needle gauge
Manual paddle valves offer control of front and rear air bags. 200 psi dual needle gauge included along with mounting bracket for a clean install.

Air Zenith air compressor
Basic kits come with a single Air Zenith compressor. We chose to use Air Zenith compressors for their reliability and performance.

Wide Range Height Adjustability
Range of lowering is 0 to 120/200mm depending on vehicle.

High Pressure Air Bags
Engineered and designed to match your vehicle. Sleeve type and double bellow type bags are available depending on what type of OEM suspension your vehicle has. Air pressure directly corresponds with how stiff or soft your car rides. Higher PSI = stiffer ride. Lower PSI = softer ride. Each car is different and it may take some time to dial in your preferred settings

High Performance KSport Shock Absorbers
Every air kit comes with the same quality shocks that are standard in our control Pro coilover systems. Air kit shocks have a different internal valving setting to accommodate changes in PSI.

Adjustable Lower Mount
Adding further fine tuning of your ride height at any PSI setting you chose is the ability to have an adjustable lower mount just like our coilover kits. The benefit to this is being able to get the perfect ride height at basically any PSI you are comfortable driving at

6 Way Adjustable Damping
All Ksport AirTech systems offer 36 levels of damping which allow you the ability to dial in your air suspension even further. Set damping softer (counterclockwise) or stiffer (clockwise) by simply inserting the included damping knob and turning it either way.

This Item is special order only and is subject to our special order T&C’s please read these before finalising your payment a link to our T&C’s can be found on the checkout page below the shopping cart.

Unleash superior rear brake performance when going sideways with Project Mu’s D1-Spec Extreme rear brake pads. An evolution in rear brake pad performance moving on from the discontinued “D1 Spec” version.

The Project Mu D1 Spec Extreme rear brake pads offer no compromises drift performance by utilising a super graphite metallic material which offers unmatched initial bite for improved drift initiation. D1 Spec Extreme pads are ideal for the drift competitor who demands extreme performance.

These pads have been developed for competition use specially for drift applications. Designed to provide the best combination of fade-resistance, bite and initial bite.

Specs: 

• Material: Super Graphite Metallic
• Temperature: 50-550C
• Friction Coefficient: 0.48-0.59μ

Currently Special Order Only.

Please note Image is not of the actual pad and is for illustration purposes only.

Project Mu’s Bestop pad is designed as an improved replacement over genuine OEM road pad.
It has better temperature and friction capabilities than standard OEM pads, but the same low noise & dust characteristics. Something that is important to many of our customers.

Use Project Mu’s BestStop compound pads if you cruise and have the occasional spirited drive.
Please note these are not a fast road/track pad, if your going to be pushing your car on a regular basis we recommend looking for a more performance based set of pads.

Pricing is comparable with OEM replacements and performance is improved making this pad a ‘no brainer’ for your street car.

Bestop Pads Specs:

• Friction Material: Non Steel
• Temperature Range: 0～350℃
• Friction Coefficient: 0.30～0.38μ

BestStop brake pads offer excellent value for money and improved performance over other OEM equivalent brake pads.

If changing brake pads to a new compound that offers improved brake performance Essex Rotary always recommend changing both front and rear brake pads at the same time so as not to upset the cars front to rear brake balance.

We are offering a small discount when buying a full set front and rear (F+R) plus combines delivery saving also. Please use the dropdown menu to select your pad requirements.