Pair of high quality RX-8 Brake Calipers with conversion kit to enable standard calipers to be replaced. This caliper conversion kit enables you to ditch the standard single piston sliding caliper and fit this race proven four piston calliper that provides more pad pressure evenly to both sides of the disc at one giving a substantial improvement to your RX-8’s braking efficiency.


Recent tests at Brands Hatch have proved this Brake conversion to be very efficient when used in conjunction with our upgraded Disc package with the braking distances reduced by 50% compared to previous visits to this circuit with the same RX-8.


Not only that, they also look damm good too!

Kit includes everything needed to upgrade your RX-8 front calipers into a big four pot conversion with all the brackets and bolts required to fit the kit using your existing brake discs plus a set of fast road brake pads


Available in both Red or Black finish.

Kit includes brackets and pads as well as the calipers.


Due to their Value this caliper kit is special order only from the USA so can take up to 6 weeks for production and delivery.


Please note: This is a direct D.I.Y bolt-on conversion with only a very small modification required to the tin back-plate to accommodate the new caliper bracket .



 

Complete brake package upgrade that will not only reduce your braking distances tremendously but also look great behind those big 18″ wheels
Complete kit consists of:-

• Complete Front and Rear set of open slot brake discs which have been found in long term tests to be more durable than standard Mazda Disc’s whilst also giving a brake performance increase proven on-track by many UK RX-8 Owners.
• Pair of big four piston front brake Calipers to replace the original Mazda single piston calliper, available in either red or black
• Unlike many other aftermarket callipers, Racingbrake callipers come with double seals inside so they can cope with being used in dirty conditions on the road
• Complete set of  Racing Brake Front and Rear ET500 brake pads
• Complete set of  Racing Brake braided brake lines.
• 2 bottles of R600 Racing brake fluid that is enough to bleed the whole system

Racing Brake Front XT960 and Rear Hawk HPS pads (avaliable at extra cost if lots of track work is planned)


Because of the value of this kit this item is special order only from the USA. please allow up to 6 weeks for this kit to arrive.


Please note: This is a direct D.I.Y bolt-on conversion with only a very small modification required to the tin back-plate to accommodate the new caliper bracket .

Hawk Performance HP+ compound brake pads are a popular choice for many track day derivers of those that just want extra bite on the road. They give great performance with minimal initial warm up though as heat builds their stopping power does too. Hawk HP+ Pads do create more dust then the HPS compound however this is normal for most pad compounds as you start to increase in stopping power.

• Working Range – 38-427 °C( 100-800°F)
• High Friction Output
• Dual Purpose fast road and track day pad
• Work from cold

Applications include Sprint, Hill Climb, track day

These are not always in stock at our workshop/store so please allow around an average of 7 days for delivery if there is Stock in Europe but up to 28 days if they have to be ordered in. If you need them quickly please contact us fisrt.

Ultimate stopping power in an ultra-low dust, low noise ceramic compound!

Hawk Performance offers a premium, high performance, ultra-low dust, low noise compound called Performance Ceramic.
Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness), creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad.

Today’s alloy wheel designs on premium vehicles has contributed to customer demand for a low dust performance brake product. S

• Extremely quiet
• Ultra low dust
• Increased stopping power
• Gentle on discs
• Extended pad life
• Improved braking with very low dust and low noise

Note:
Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.

Please allow between 7 and 21 days for delivery once ordered

These Hawk HPS (High Performance Street) pads offer a significant upgrade to your RX8’s stopping power while still being gentle on even your standard brake discs.

Because these pads offer such a significant increase in stopping ability over the standard pads we only sell these HAWK HPS in a set of front and rears. Changing just the fronts or just the rears will significantly upset the balance of your cars braking and stability under braking.

Recommended for use with either our Black Diamond of Racing Brake Discs.

Please allow 7-21 days for delivery.

Racing Brake –  Brake line kit comes with all the necessary components for a complete installation of front and rear axle.


These lines are built to RB specifications, meeting D.O.T. Certification. Stainless steel brake lines improve braking performance, eliminates the spongy feel of rubber hoses and provides superior resistance to corrosion.

Racing Brake Products are made in the USA, please Allow up top 21 days for delivery of these hoses when out of stock here in the UK.

These ultra high performance brake discs from Racing Brake offer superior stopping power and durability over many other discs on the market.

why not go for these high quality race proven disc’s that will not only perform better under prolonged braking, but also  will not rust in the centre like the standard RX-8 fitment where they are painted.

These Front and Rear slotted brake discs have been found in long term tests to be more durable than standard Mazda Disc’s whilst also giving a brake performance increase.

Pair These with our high performance brake pads like the Hawk HPS pads for even better stopping power.

Please ensure you select the correct discs for your application.

Because these discs are from the USA please allow up to 28 days for delivery.

These high quality performance brake discs from Black Diamond are an excellent upgrade for anyone looking for a more stopping power for fast road and occasional track day use.

Black Diamond discs are phosphate coated motorsport quality with a drilled and grooved friction surface.

The unique compound and extra heat treatment for awesome braking performance has made Black Diamond Discs winner of many back to back tests against other brands.

Please ensure you select the correct application for your vehicle. Either front, rear or JDM fronts.
The JDM cars that where not fitted with sport pack upgrades will have the smaller 302mm front discs the rears will remain the same.

Please allow 7-21 days for delivery of these parts.

Genuine Mintex Brake Pads fir your RX-8’s brakes without a problem.
Ideal for those that are just looking for a high quality replacement pad for regular street driving that meet OEM specification.

Our Most popular replacement pads from our range.

Please ensure you select the correct set from the drop down menu.

Please Allow up to 7 days for delivery

*image for illustrative use only not of actual product.

These are Genuine Mintex brake discs for fit the Mazda RX-8

High quality replacements that meet OEM specification these are our most popular replacement discs.

Available for front and rear and also JDM fronts

Please Note!

JDM RX-8 that where not fitted with the sports pack (like our UK cars) have a smaller front disc size of 302.8mm however the read discs on JDM vehicles are the same.

Prices are per pair.
Please allow up to 7 days for delivery maybe longer when out of stock.