Now available from us right here in the UK.

The RE-medy water pump has been designed by our friends from Mazmart in the USA, They take a new genuine water pump and install their very own high quality billet impeller on it, This helps increase flow while decreasing cavitation at higher RPM.

This high flow RE-medy water pump is designed to prevent cavitation at engine speeds as high as 10000 rpm.

It is a direct fitment, as OEM and comes with a new Mazda OEM gasket.

RX-8 water pump for series 1 version, 2003-2008.

This Kit contains everything you will need to carry out the conversion from conventional coolant over to Evans Waterless Coolant on your Mazda RX-7 or RX-8.

Plus we are offering  5% Discount when purchasing this pack compared to purchasing everything individually.

This Kit Contains the following;

• 2 x 5 Litre bottles of Evans Prep Fluid.
• 2 x 5 Litre bottles of Evans Power Cool 180 Waterless Coolant.

This is the perfect starter pack to carry our a full conversion offered with a great bulk shipping discount.

Before using Evans Waterless coolant for the first time it is advised that Evans Prep fluid is used to flush the cooling system of ay remaining water based coolant, This is essential for a successful conversion to Evans Waterless coolant.

For more information on Prep Fluid and Power Cool 180 can be found in their individual product descriptions above.

Evans Prep Fluid MUST be used before Evans coolant is installed in your cooling system for the first time, when converting from traditional coolant.

Evans Prep Fluid is specifically formulated to hygroscopically absorb any water-based coolant remaining in the cooling system after initial drain. Because certain parts of the cooling system might not drain out with gravity, and it would take too long to disconnect every pipe etc., installing a scavenging fluid is the most practical method of removing all the water-based coolant.

The Prep Fluid is not formulated to chemically clean the engine of rust and scale, but the process of circulation and draining will help remove any loose sediment.

Evans Prep Fluid must be used before converting from a water based coolant to Evans Waterless Engine Coolant.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

Evans Power Cool 180 is the coolant of choice for many professional racing teams and performance car specialists. For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Conversion from a water-based coolant to Evans is a straight forward process that can be undertaken by anyone with some basic experience in engine mechanics.

The primary objective of converting to Evans Waterless Engine Coolant is to eliminate all of the problems associated to water:

Eliminates Overheating
Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure
Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion
Water promotes corrosion via oxidation and electrolysis. Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP
Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating – thus increasing combustion efficiency and delivering more power.

Stops Erosion
Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection
Evans Waterless Coolants freeze below -40ºC

Non-Toxic
Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

If the engine to be converted is currently filled with a water-based coolant an important part of a good installation is using Evans Prep Fluid. Prep Fluid is specifically formulated to purge remaining water-based antifreeze from the system after initial drain. Evans Prep Fluid is sold separately and available just below.

2 x 5 Litre cans will be required to fill a full cooling system of most RX-7’s or RX-8’s
We are offering a Discounts for 2 bottle packs plus combined delivery discount if buying two bottles together to be shipped to a UK Mainland address, Simply select your desired quantity from the drop down menu.

A slightly thinner core that the 53mm Series 1 version with a saving to boot, plus a New Improved Price
With cooling being so important to rotaries why not look at upgrading your cooling system. a Koyorad can aid in dropping your coolant temps significantly. Their high quality aluminium construction and OEM fitment means your not paying to have it modified (like many cheaper “racing” radiators)
The KOYO R-Series Core radiator provides improved cooling coverage for both street and track applications combined with show quality looks and finish
Construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish. The tubes, fins, headers, and brackets are brazed in a state-of-the-art Nocolok furnace, which bonds these components into a virtually indestructible radiator unit.

All fan mounts are situated to OE specifications, and using the OEM mounting locations facilitates fitment into the RX-8.
Why not include a set of SFS Performence Radiator hoses with your new cooling upgrade
Suitable for 2008-2011 RX-8 R3 models with Manual transmission only
Please allow 7-14 days for delivery depending on stock levels.
PICTURE IS FOR ILLUSTRATION PURPOSES ONLY

Add an extra 750cc of oil to your RX-8’s differentials capacity. and aid cooling.

Increasing the capacity of your differential is something that is quite often overlooked on a performance car. Though the stock diff holds around 1.4 litres of oil increasing its capacity can aid cooling of everything back there and prolong the life of your expensive aftermarket Diff if fitted.

A great upgrade for those looking to take their car on track. Revolution understand cooling of the diff is very important so have also integrated cooling fits in to their design.

Made from cast aluminium, this cover increases the diffs oil capacity by around 750cc
This Diff cover is compatible with all model years of the RX-8

This is currently a special order item only, if your in a hurry for it we would recommend contacting us prior to ordering online for availability.

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1850 cfm of airflow
• Universal fitment
• Compact design with a diameter of 406 mm and an overall thickness of only 73 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 16.75″
• Fan Diamiter – 385mm
• Blade Diameter – 15.375″
• CFM Rating – 1850cfm
• Fan Speed – 1800rpm
• Current – 34.0A (inrush)
• Current – 7.18A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1300 cfm of airflow
• Universal fitment
• Compact design with a diameter of 328 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 14.75″
• Fan Diamiter – 328mm
• Blade Diamiter – 12.875″
• CFM Rating – 1300cfm
• Fan Speed – 2200rpm
• Current – 15.1A (inrush)
• Current – 7.8A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 1150 cfm of airflow
• Universal fitment
• Compact design with a diameter of 305 mm and an overall thickness of only 63.5 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 12.5″
• Fan Diamiter – 285mm
• Blade Diamiter – 11″
• CFM Rating – 1150cfm
• Fan Speed – 2000rpm
• Current – 12.7A (inrush)
• Current – 7.6A (normal)
• Voltage – 12volts

This fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto universal fan mount kit.

• High-flow fan provides 950 cfm of airflow
• Universal fitment
• Compact design with a diameter of 255 mm and an overall thickness of only 60 mm provides increased engine bay space
• Easily reversible for use as a pusher or puller fan
• Mishimoto Lifetime Warranty

Specs

• Housing Diamiter – 11.5″
• Blade Diamiter – 255mm
• CFM Rating – 950cfm
• Fan Speed – 2300rpm
• Current – 13.08A (inrush)
• Current – 6.8A (normal)
• Voltage – 12volts