This beautiful catback system from the world famous Trust GReddy is made from high quality Stainless Steel and finished with GReddy’s slash style burnt tip (coloured) exhaust tips.
This system looks and sounds great and will add a sportier look top your RX-8
The GReddy CS-GT catback comes in two versions, please select your model RX-8 in the drop down menu.
Catback systems will only replace the rear exhaust muffler and does not replace the catalytic converter so you stay legal.
These systems are shipped direct from GReddy Japan so delivery can take up to 28 working days.

Genuine HKS Legamax Catback system to fir the series 1 RX-8 2004-2008
Made from polished 304 stainless steel this beautiful system will look great for years to come and sound even better. designed to reduce back pressure bu increasing the exhaust flow its worth noting this system is not on the subtle side of the spectrum.
Please note this will not fit the R3 version due to the revised rear bumper design on the R3
These systems can take up to 28 working days for delivery from HKS Japan.

This blanking plate is designed for use on both OEM and aftermarket exhaust manifolds in order to block off the opening left when removing the Secondary Air Injection System typically when running a Decat.

Made from high quality stainless steel and thick enough that warping from heat is no problem

When installing the Essex Rotary blanking plate you will need to use the existing metal gasket and fasteners to hold it in place.

We do not recommend the removal of the secondary air injection system if you are still running a catalytic converter.

Removal of the secondary air injection system will usually cause the Check engine Light to illuminate this can be permanently turned off with our Stage 1 ECU Flash service.

By now its well known that a non-resonated catalytic converter pipe on the RX-8 can produce a overwhelmingly loud exhaust and cause “drone” in the cabin at motorway speeds, but if you require a modest, quieter exhaust tone, then the Racing Beat dual resonated pipe is your answer. Designed to provide the ultimate combination of performance AND sound, this pipe is sure to be a hit with RX-8 owners.

Racing Beat offers a full 304-stainless steel catalytic converter replacement pipe with dual resonators for RX-8 racing applications. Fitted with two (2) specially designed resonator units specifically for the RX-8 chassis. Both our resonated and non-resonated pipe versions are a direct bolt-on replacement for the stock catalytic converter section. Our replacement pipes utilize a genuine OEM rear mounting flange for a secure fit to the stock (or an aftermarket) exhaust system. Each replacement pipe is equipped with a sensor fitting for the oxygen sensor.

(Note: With some cars fitting this part may cause the “check engine” light to be illuminated, but performance and all other engine systems will not be affected. Essex Rotary offer out Stage 1 ECU Flash that can disable this CEL)

Delivery time can be 2/3 weeks

Important: Whilst this is a perfectly safe modification to normal aspirated RX-8’s, If your engine has a Turbocharger or a Supercharger fitted, fitting this de-cat pipe will make the exhaust gasses escape more freely and could increase the boost level causeing the engine to detonate with out the ECU being remapped.

PLEASE NOTE for legal reasons this product is sold for off road use.

RX-8 Decat Race Pipe – 2004-2011 RX-8
Racing Beat offers a full 304-stainless steel race pipe for RX-8 (for racing applications only).

Weighing aprox 4.5Kg. This mandrel-bent 3″ OD racing pipe is a direct bolt-on replacement for the stock catalytic converter section. This pipe utilizes a genuine OEM rear mounting flange for a secure fit to the stock (or an aftermarket) exhaust system.(many other decats require new shorter joint springs or modification to the existing springs)

The race pipe is equipped with a sensor fitting for the oxygen sensor. (Note: Placement of the sensor in the pipe will cause the “check engine” light to be illuminated, but performance and engine systems will not be affected.) Removal of the OE catalytic converter/presilencer section will result in a noticeably louder exhaust tone.

Please select no delivery if your purchasing this item for us to fit at our workshop
Please allow up to 14-21 days for delivery depending on stock

Available for both 2004-2008 and 2008-2012 RX-8 models.
PLEASE SELECT YOUR CORRECT MODEL APPLICATION FROM THE DROP DOWN MENU NET TO THE “ADD TO CART” BUTTON
The “Racing Beat REV8” street legal, cat-back exhaust system is the perfect replacement for your stock RX-8 exhaust with many happy customers proving testament to this.

The system is designed for the owner wanting a quality system that is not too loud that the noise drones in the cabin, but loud enough to hear the true sound of the Rotary engine when you want to plus you will see horse power and torque gains to make your RX-8 even more fun to drive.

Offering a real horsepower gain over your stock unit, the Racing Beat system consists of a 304 stainless steel Racing Beat connecting-pipe, muffler canister, tubing, flanges, and outlet tips. The replacement connecting-pipe is manufactured using full 3-inch (OD) tubing and features cast stainless steel flanges for positive exhaust gas sealing. The stainless steel muffler canisters are each finished with 4-inch, polished 304 stainless tips for an aggressive look.

Please allow 7-21 days for delivery depending upon stock

The Racing Beat REV8 “Street Legal”, Cat-Back RX-8 Exhaust System (Twin Outlet Tips) is the perfect replacement for your stock exhaust – a durable assembly offering a real horsepower gain over your stock unit. Our RX-8 exhaust system consists of a 304 stainless steel Racing Beat connecting-pipe, muffler canisters, tubing, flanges, and outlet tips. The replacement connecting-pipe is manufactured using 3-inch (OD) tubing and features cast stainless steel flanges for positive exhaust gas sealing.

Twin Tips:
The REV8 Exhaust system will certainly stand out from the crowd with its distinctive twin tip outlet design!

A first of its kind offering for the RX-8, these highly polished stainless steel tips offer a welcome change from the standard single tip design and provide a well-balanced look to the rear of the RX-8.

Mirroring the design of the new-for-2009 tail light assembly, the twin tips provide a symmetrical balance from rear facing angles, and maximizes the exhaust openings in the bumper.

(2009+ RX-8 exhaust systems differ with regards to the positioning of the outlet tips and are NOT compatible with earlier 2004-08 RX-8 models, without modification to the Series 1 exhaust shrouds)

Fits 192ps, 231ps, R3 and JDM Imports

The Racing Beat RX-8 manifold is constructed using 100% stainless steel for superior quality, performance and appearance. Exclusive cast stainless-steel mounting flange has been designed to allow the smooth transition of the exhaust gas flow from the engine to the primary tubing. Incorporated into the flange design are critical emission control air passages that were included on the OEM flange design.

These small passages allow air to be pumped into the exhaust ports to aid in more efficient catalytic converter function.

The Racing Beat manifold does not remove any catalytic converters, and is equipped with an oxygen sensor fitting and retains all emissions control functionality.

The Racing Beat Manifold utilizes 1.75” OD, 14 gauge (.083″), mandrel-bent, 304 stainless steel tubing and features an exclusive Racing Beat engine-to-header flange. All required mounting hardware, an outlet gasket, and instructions are included.

A engine-to-manifold gasket is NOT supplied with the kit, but the stock unit can be re-used unless it shows signs or damage, leakage, or extended wear.

Please allow 7-21 days for delivery of this item depending on stock availability
Select “no delivery” if you a purchasing this manifold and would like it fitted at our workshop

Essex Rotary can now offer this high quality catalytic converter as an affordable alternative to replacement of your failed OEM Mazda cat. This catalytic converter complies with the latest Catalyst regulations that came into force on the 13th August 2009.

This Catalytic Converter meets R103 type approval conforming to the new EU Emissions regulations now necessary for RX-8’s to pass the U/K MOT test.

Constructed from superior matrix materials to those offered at a much cheaper price our Cat will give you many years of trouble free operation and will not illuminate the CEL, We have now installed these on many customers cars and have a long track record of trouble free use.

This product is priced at a fraction of the price of a genuine Mazda unit (some dealers are asking as much at £1700 for a Mazda OEM unit) Our Catalytic Converter comes with a 2 year Warranty

Please note if you have not addressed the cause of your Cat failure before installing your new Cat this will cause your new cat to fail prematurely, and in some cases the manufacturer may void the warranty.

 
Please allow up to 7 days for delivery of this part.