Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust, intake, blow-off valve and intercooler and adding more fuel and boost, but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles, and for many, we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application, kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates.

Kit Includes

• GReddy single TD06SH 25G 16cm² turbo
• SUS Manifold 50mm ex mani
• Airinx Filter,
• TIAL External Wastegate  (TIAL09 return)
• Fittings

This kit is special order and may take up to 8 weeks for delivery.

Get big power gains with the GReddy T78 Turbo Kit.
All GReddy Turbo and Turbo Upgrade kits exclusively use GReddy Spec. Mitsubishi Turbochargers. Our kits are design and tested to match the best-sized turbo per application. This means you get good response, smooth driveability, performance that can still be upgraded, and lasting reliability.

Kit Includes

• Greddy T-78 Turbo (T78-33D 17cm)
• Stainless Steel SUS Manifold
• Stainless Steel SUS Downpipe
• Racing Wastegate (50mm & Type RO8)
• All Lines and fittings

Image is for illustration only and actual kit may vary from that in the picture.

Special Order Item, this may take up to 8 weeks for delivery.

The GReddy BOV FV is a new generation of blow off valve. The unique “Floating Valve” design incorporates a revised adjustable dual spring system, while maintaining the advantages of the previous models’ push valve structure and silicone diaphragm control. The improved design makes spring preload setting less dependent on the idle, while providing better response, increased valve travel, more air-flow and added resistance to premature valve lift under all conditions. Also maintained is a slimer CNC outlet with discharge ports to draws surrounding air to amplify the blow-off sound, however this can be replaced with optional re-circulation adapters in various sizes.

This Kit is Designed to run on the standard RX-7 Twin turbo Setup, Modification to enable use on a single Turbo Should be possible with the Aluminum Adaptor Sold Seperately.

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

RX7 FD3s Kit includes

• SQV Blow Off Valve
• Recirculation Adapter
• Vehicle Specifit Fitting adapter
• O-ring,
• C-ring (Securing Clip)
•  Vacuum Hose T-fitting 6×4×6
• Vacuum Hose T-fitting 4×4×4
• Inline Air Filter and Tylap.
  

HKS Part Number: 71008-AZ007

This is a Vehicle Specific Kit for the Fd3s
Recirculation Adapter is Included.
A triple fin and replacing type recirculation adapter are included for vehicle specific kits. (These parts are not included in the universal kit.)
Using this recirculation adapter allows suction return by fabricating the return piping.
(Some kits include Suction Return Kit.)
The vehicle specific Suction Return Kit (Blow-off parts) is available separately.

Please Allow up to 28 days for delivery for delivery.

HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support new generations of turbocharged vehicles.

Universal Kit includes

• SQV Blow Off Valve
• O-ring,
• C-ring (Securing Clip)
•  Vacuum Hose T-fitting 6×4×6
• Vacuum Hose T-fitting 4×4×4
• Inline Air Filter and Tylap.
  

HKS Part Number: 71008-AK001

Please Allow up to 28 days for delivery for delivery.

Single Turbo. Airflow less setup requires F-Con Vpro or similar.
Compatible with air pump.
For use with R Type Intercooler (13001-AZ001,2)

Get the power-up plus for the price of normal change for a exciting driving experience!!
TO4z can produce from lower range of rpm to higher range of rpm to increase the peak power(about 400ps).
As the big single is in advantage of power, FD3S has more boost presure, more air, and more power. And still it has compactness kit for tuning-up. This kit is suitable for one who wants to change the deteriorated stock turbine.

This Full Turbine kit is low cost single turbine and for novice at single turbine or a RX-7 (FD3S) owner who wants to change the original turbine.
Adopted 4 holes flange to attaching part of the turbine and front pipe which makes it easy to install.
Includes chamber pipe which matches original intercooler layout. With the chamber pipe it supports the original intercooler and R type intercooler V system.

HKS Part Number: 11003-AZ001

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

This is HKS’ T04s Single Turbo kit conversion kit WITHOUT THE TURBO. Compatible with air pump. Compatible with stock intercooler but we would recommend R Type Intercooler (13001-AZ003,4)

TO4S can produce from lower range of rpm to higher range of rpm to increase the peak power (about 400ps).
As the big single is in advantage of power, FD3S has more boost pressure, more air, and more power. And still it is a compact kit for tuning up your FD3s. This kit is suitable for one who wants to change the deteriorated stock turbine.

Kit Includes

• Exhaust Manifold
• Down Pipe
• Bypass Valve
• Suction Pipe
• Chamber Pipe
• Wastegate Assembly
• Other short parts and fittings.

PLEASE NOTE THIS KIT NOED NOT INCLUDE THE T04S TURBO
HKS Part Number: 11003-AZ002ZZ

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

This is HKS’ Single Turbo kit. Compatible with air pump. Compatible with stock intercooler but we would recommend R Type Intercooler (13001-AZ003,4)

TO4S can produce from lower range of rpm to higher range of rpm to increase the peak power (about 400ps).
As the big single is in advantage of power, FD3S has more boost pressure, more air, and more power. And still it is a compact kit for tuning up your FD3s. This kit is suitable for one who wants to change the deteriorated stock turbine.

Kit Includes

• T04s Turbo
• Exhaust Manifold
• Down Pipe
• Bypass Valve
• Suction Pipe
• Chamber Pipe
• Wastegate Assembly
• Other short parts and fittings.

HKS Part Number: 11003-AZ002

This kit may take up to 2-6 weeks for delivery depending on stock availability. please check with up prior to ordering if you require this part urgently.

HKS Intercooler Kits 13001-AZ002 for Mazda RX-7 (FD3S Chassis / The Battery May need to be changed for a different time to accommodate the installation of this large intercooler recommended battery spec “38B19R”)

This HKS R-Type Intercooler Kit is designed for a V Mount setup when running HKS TO4S FTK (Full Turbine Kit) or TO4Z SPL Turbo Kit Size : 600mm x 255.6mm x 103mm. View all Mazda RX-7 Intercooler

HKS Intercooler Kits are application specific upgrade kits for factory intercooled turbocharged vehicles. Designed specifically for each application; intercooler width, height, thickness and placement are calculated for maximum efficiency and performance. All necessary silicone hoses, brackets, hardware and fittings are included for a complete bolt-on installation.

This Item is made to order direct from HKS Japan and can take up between 6-8 weeks once your order has been placed before it arrived in the UK for delivery.

This is a Trust GReddy Spec LS Front Mount Intercooler(FMIC) Kit which is available for the Mazda RX-7 FD3S equipped with the 13B-REW rotary engine. The Spec LS is one of the newest intercooler kits available from GReddy. It features a 20% decrease in weight from the series it is replacing, the Spec M. Trust recommends using the Spec LS on anything using a stock turbine up to boosted sports turbines. This kit was designed for the highest amount of cost performance but features high quality components to make this one of the best kits available on the Japanese market today! Included are grommets, hose clamps, piping, mounts, installation manual, and a high flowing intercooler core.

Specifications

• Product: Front Mounted Intercooler Kit
• Type: LS
• Spec: M
• Core type: 24E
• Height: 280mm
• Length: 600mm
• Width: 76mm
• Number of cores: single

Notes: 12040422 Requires Airinx Kit SKU: 18698 and Battery size 38B20R should be used.

Please note that the actual product may vary slightly from the image.
Designed to operate with the stock intake elbow, we can special order the correct version for you if your running the GReddy Compressor tube.

If not in stock this item may take up 6 weeks for delivery once ordered.